Pressure riveting nut is applied to a nut on the thin plate or sheet metal, the shape is round, end with embossed teeth groove.

Pressure riveting nut application guidelines:

1, S series pressure riveting nut adopts free-cutting iron, after heat treatment processing, CLS series pressure riveting nut is easy to use free cutting stainless steel, the surface is not processing.

2, low carbon steel plate hardness must be smaller than 70 rb, stainless steel plate hardness must be smaller than 80 rb.

3, suitable for all kinds of thickness of the plank, minimum thickness of 0.8 mm, must be according to the sheet thickness and nut specifications, to determine A size of the end of the corresponding number Z, users on the basis of the thickness of the plate tail number sampling order in the table;

4, according to the aperture size to precise control, according to the size of 0 to + 0.075 mm tolerance machining, it is best to punching, nut is generally from the "disconnect" plate installation.

The installation process generally by the pressure riveting operation, must not be shock type.